BABY BOTTLE 8OZ – Flossie Blanks

Sublimation Baby Bottle

Stainless Steel Double Wall vacuum with handgrip.

Printing Measurements 8 W X 6.2 H

Product Features:

• No taper, BPA free
• Dye sublimation ready
  
• Powdered-coated finish, dust resistant

Instructions:

****These times and temps are based on what works for Flossie Blanks and no other person.****

1. Clean Tumbler with alcohol first to remove any prints or oils.
2. Print and Cut out the pattern and use heat tape to adhere it to the tumbler.
3. (OPTIONAL) Cover the cup with shrink wrap.
4. Place in convection oven for 5 minutes at 380 degrees.
5. Remove the shrink bag and the image from the tumbler as soon as possible.
   

Link for Instruction Video located on bottom of  homepage.

• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press/oven brand and model ink and paper and atmospheric conditions.